AllMounts AS01346FF Installationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationshandbuch für Racks & Ständer AllMounts AS01346FF herunter. AllMounts AS01346FF 8 Seiten. Video wall stand & cart and accessories

Seite drucken
NOTE: Read the entire instruction manual before you start installation and assembly.
• Do not begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local distributor.
• This mounting bracket was designed to be installed and utilised ONLY as
specified in this manual. Improper installation of this product may cause damage
or serious injury.
• Always use an assistant or mechanical lifting equipment to safely lift and position
the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage
to the items, This greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.

Component Checklist

IMPORTANT:
Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.
AS01346FW/FF
middle base (x1)
left base
A
universal plate (x3)
F
1
WARNING
(x1)
right base
(x1)
left cover
(x1) right cover(x1)
B
C
D
adapter bracket
(x6)
connecting fitting
G
cable clamp (x12)
L
4mm Allen key (x1)
Q
Component (AS01346FW only)
caster wheel/brake
U
Package M (x3)
M5x14
M-A
M8x30
M-E
AS01K
( The following accessories are optional )
E
(x3)
H
column (x1)
connecting piece (x1)
I
M8x65 (x8)
M8x16 (x4)
M
N
5mm Allen key (x1)
6mm Allen key (x1)
R
caster wheel
(x2)
wrench (x1)
(x2)
V
W
(x4)
M6x14
(x4)
M8x20
M-B
(x4)
washer
(x4)
small spacer (x8)
M-F
power socket (x1)
T-H
top cover (x1)
J
K
M8x40(x4)
3mm Allen key (x1)
O
P
D8 washer (x4)
S
T
Component (AS01346FF only)
supporting foot (x4)
rubber pad (x4)
X
Y
(Peel off the backing paper from the rubber pad
and stick the rubber pad on to the supporting foot.)
(x4)
M6x30
(x4)
M-C
M-D
big spacer (x4)
M-G
M-H
ST4.8x9.5 (x4)
P-G
2