Miele KT 3538 Sed Betriebs- und Installationshandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Betriebs- und Installationshandbuch für Kühlschrank Miele KT 3538 Sed herunter. Miele KT 3538 Sed 36 Seiten.

Seite drucken

Repairs to electrical appliances

should only be carried out by a suit-

ably qualified and competent person

in accordance with local and na-

tional safety regulations. Repairs

and other work by unqualified per-

sons could be dangerous. The man-

ufacturer cannot be held responsible

for unauthorised work.

The following can be corrected without

contacting the Miele Service Depart-

ment:

^ Check to see whether any pieces of

furniture next to the appliance are vi-

brating whilst the appliance is in op-

eration.

Switch the appliance off then:

^ Check whether the appliance is

aligned correctly.

^ Check whether all parts at the rear of

the appliance are free from hin-

drance. Remove any hindrance.

^ Check whether the cable clips were

unclipped from the back of the appli-

ance before installation. They could

vibrate when the appliance is operat-

ing.

^ Are all removable parts correctly fit-

ted in the appliance?

^ Are any bottles or containers unsta-

ble or knocking against each other?

Remember that the noise of the com-

pressor and the coolant circulating in

the system is unavoidable.

^ Make sure that the temperature dial is

not pointing to the "0" position.

^ Check that the plug is correctly in-

serted in the socket.

^ Check that the fuse is not defective

and that the mains fuse has not

blown. If it has, consult the Service

department.

^ Turn the temperature dial to a setting

closer to "0".

^ Check that the freezer section door

has been properly closed.

^ Has a large amount of fresh food

been put in at the same time for

freezing.

This makes the compressor run for

longer, causing the temperature in

the refrigerator section to fall auto-

matically. No more than 2 kg of fresh

food should be frozen at one time.

^ Check whether the winter setting is

still on.

^ Check whether ventilation gaps have

been covered over or become too

dusty.