Miele CS 1223 Betriebs- und Installationsanleitung - Seite 26
Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Kochfeld Miele CS 1223 herunter. Miele CS 1223 48 Seiten. Induction wok
Auch für Miele CS 1223: Betriebs- und Installationsanleitung (40 seiten), Betriebs- und Installationsanleitung (44 seiten), Betriebs- und Installationsanleitung (40 seiten), Betriebs- und Installationsanleitung (44 seiten)
Seite drucken
Safety features
Overheating protection
The induction coil is equipped with
overheating protection. Before the
induction coil gets too hot, overheating
protection cuts in in one of the following
ways:
– If the booster function is being used
it will be switched off.
– If the temperature continues to rise
after the booster function is switched
off, the power setting will be
reduced.
– If the temperature continues to rise
after the power setting has been
reduced, the induction wok will
switch off and H will appear in the
display.
^ Turn the control to "0".
The induction wok can only be used
again in the normal way after the H has
gone out.
If the control is not turned back to "0", C
and 0 will flash in the display alternately
once the induction wok has cooled
down sufficiently. To use the induction
wok again, first turn the control to "0".
26
The induction coil can overheat if
– the appliance is used for too long at
maximum power.
– the appliance is not well enough
ventilated.
If a drawer is fitted directly underneath
the appliance, there must be sufficient
space between the drawer and its
contents and the underside of the
appliance in order to ensure sufficient
ventilation for the induction wok.
If the overheating protection device
trips again, contact the Service
department.