Miele CS 1223 Betriebs- und Installationsanleitung - Seite 24
Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Kochfeld Miele CS 1223 herunter. Miele CS 1223 44 Seiten. Induction wok
Auch für Miele CS 1223: Betriebs- und Installationsanleitung (40 seiten), Betriebs- und Installationsanleitung (48 seiten), Betriebs- und Installationsanleitung (44 seiten), Betriebs- und Installationsanleitung (40 seiten)
Seite drucken
Problem solving guide
,
Installation work and repairs to
electrical appliances must only be
carried out by a suitably qualified
and competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK). Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if...
... the induction hob does not heat up
Check whether
– the safety lock is activated.
If necessary, deactivate it (see
"Safety lock").
– the mains fuse has blown.
– the overheating protection
mechanism has been triggered (see
section "Protection from
overheating").
– the demo mode has been activated.
When demo mode has been
activated, the "d" symbol will appear
in the display for a second.
To deactivate demo mode, turn the
control anticlockwise as far as it will
go twice briefly (<1 second), then
turn it again and hold for approx. 3
seconds.
24
If none of the above is the case, then
turn the control to "0", and disconnect
the appliance from the electricity
supply for approx. 1 minute.
Reset the trip switch in the mains fuse
box, and switch the appliance back on.
If it still will not switch on, contact a
qualified electrician or the Miele Service
Department.
... ß appears in the display
Check whether the empty appliance
has been left switched on inadvertently.
... F and 01 flash alternately in the
display.
Check whether the control is damaged
or stuck.
If this is not the case, call the Miele
Service Dept.
... F and a number flash alternately in
the display.
Call the Service Department.
... the induction wok switches off
automatically.
The safety switch-off feature or the
overheating protection mechanism has
been triggered (see "Safety switch-off"
and "Overheating protection").