Miele CS 1223 Betriebs- und Installationsanleitung - Seite 37

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Kochfeld Miele CS 1223 herunter. Miele CS 1223 44 Seiten. Induction wok
Auch für Miele CS 1223: Betriebs- und Installationsanleitung (40 seiten), Betriebs- und Installationsanleitung (48 seiten), Betriebs- und Installationsanleitung (44 seiten), Betriebs- und Installationsanleitung (40 seiten)

^ Feed the connection cable down

through the cut-out.

^ Starting at the front, position the

appliance in the worktop cut-out.

^ Using both hands, press down

evenly on the sides of the appliance

until it clicks into position. When

doing this make sure that the seal

under the appliance sits flush with

the worktop on all sides. This is

important to ensure an effective seal

all round. Do not use sealant.

When installing several appliances, a

sealing strip must be fitted into each

spacer bar.

^ Push the appliance to the side until

the long slots in the spacer bar can

be seen.

^ Fit the sealing strip d into the long

slots in the spacer bar b.

Installing the appliance(s)

^ Starting at the front, position the next

appliance in the worktop cut-out.

^ Connect each appliance to the mains

(see "Electrical connection").

^ Check that each appliance works

correctly.

Once installed, the hob can be

removed using a special tool.

It can also be pushed up out of the

cut-out from below. It must be

pushed up from the back first.