Allnet ALL168207 Handbuch zur Schnelleinrichtung - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Adapter Allnet ALL168207 herunter. Allnet ALL168207 12 Seiten. Coaxial network adapter

Seite drucken

ALL168207 Coaxial Network Adapter

Push Buttons

Push button functions are disabled under Standby mode.

Setup Button Usage:

1. First time to setup your private network:

Step 1. Press and hold the device's "SETUP" button for more than 10 seconds. You can release the

Step 2. Repeat Step 1 to clear another device's original network encryption setting.

Step 3. Press both devices' "SETUP" button for 1 to 3 seconds. You will see both devices' "Power"

LED start blinking. Both devices start to communicate and try to setup their private network

encryption. They will complete the new private network encryption setting within 10 seconds.

You will see both devices' all LEDs are off and restart.

Note: The setup operation timeout is 120 seconds.

Step 4. If failed, please repeat Step 1 to Step 3 again.

2. Add the new device to the existing private network:

Step 1. Plug the new device. Press and hold the its "SETUP" button for more than 10 seconds to clear

Step 2. Press the new device's "SETUP" button for 1 to 3 seconds. The "Power" LED starts blinking.

Step 3. Select a random device from the existing private network. Press its "SETUP" button for 1 to 3

Step 4. The new device starts to communicate with the device from existing private network, and tries

to join this existing private network. It will complete the new private network encryption setting

within 10 seconds. You will see the new device's all LEDs are off and restart after completing

the private network setting. The existing private network device's "Power" LED become solid.

Note: The setup operation timeout is 120 seconds.

Step 4. If failed, please repeat Step 1 to Step 3 again.

3. Leave the private network:

Step 1. If the device wants to leave the private network, please press and hold the device's "SETUP"

Reset Button Usage:

1. Reset the device to the factory default setting:

Push the device's "RESET" button for 1 to 3 seconds. You will see the device's all LEDs are off and

restart. The device's setting resets to the "factory defaults".

button when you see all the device's LEDs are off and restart. The original network encryption

setting is cleared.

the original network encryption setting.

seconds. The device's "Power" LED starts blinking.

button for more than 10 seconds to clear the network encryption setting. This device will leave

the private network.

Page 11