Chroma Color Force 72 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen Chroma Color Force 72 herunter. Chroma Color Force 72 17 Seiten.
Auch für Chroma Color Force 72: Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (5 seiten)

Seite drucken

Technical

In this mode, frequency settings of the unit can be changed and addressing software

for LED engines can be uploaded.

Press Up/Down to access "Technical", press Up/Down to select either "Frequency"

or "Upload Engines".

Frequency:

The Color Force has four frequency settings available - 600, 1200, 2400 and 4800.

This allows for the LED scan rate to be synchronised with the video camera and

avoid a flickering effect. Press Up/Down buttons to select the desired frequency,

press Enter for 2 seconds to save settings.

Upload Engines:

Addressing software for LED engines can be uploaded to the Color Force from the

Chroma-Q Uploader.

1. Press Enter, Up/Down buttons to select "Upload Engines" then press Enter, and

the

display will show "Ready":

2. Connect an XLR 5-pin cable from the Uploader to the unit.

3. Power-up the Uploader - display will show the file name, and 'Ready'.

4. Press the "GO" button once to execute the uploading - red indicator light on the

"GO" button will blink.

5. The Uploader display will show a simulated arrow moving from left to right

indicating the uploading process.

6. All the green LEDs of the unit will light up (low intensity) to indicate completion of

a successful Upload and the Uploader display will show "DONE".

7. Power-cycle the unit.

(See Quick Start Guide of the Chroma-Q Uploader)

Fan Speed

The Color Force is built with internal fans with 3 speed settings – "Quiet", "Studio",

and "Live". In "Quiet" mode the internal fan is off and light output is reduced by 45%.

In "Studio" mode the fan speed is at low velocity and light output is reduced by 15%.

In "Live" mode the fan speed at the level of the previous "Version 1.9" at high

velocity and the light output at 100%.

Press Enter, Up/Down buttons to select "Fan Speed", then press Enter to select from

either "Quiet", "Studio", "Live" or "Live with Light", and then press Enter for 2

seconds to save the settings.

Reset to Default

Press Up/Down to access "Reset to Default", press Enter and the display will show

"reset?", press Enter for 2 seconds until the display shows "resetting", and wait for

the display to show "done" and reset is complete with all menu items reset to factory

defaults: DMX address = 001, Control Mode = 1 , DMX Lost = Hold, Looks = 00,

Fan speed = Live, Frequency = 600, Display = On,

2.7 DMX Protocol

Color Force DMX Personality Mode 1.

Color Force

V2.0

Channel 1

Grouping

0-100 Variable grouping range between 1-12

cells with FX running within the group.

102-206 Variable grouping range between 1-

12 cells with FX running between the groups.

209-255 Variable interval grouping range for

Color Force User Manual

In mode 1 grouping is variable.

Color Force 72 (43ch)

7fx + 12 x HSI

Mode 1

Grouping

0-100 Variable grouping range between 1-8

cells with FX running within the group.

102-206 Variable grouping range between 1-8

cells with FX running between the groups.

209-255 Variable interval grouping range for

Color Force 48 (31ch)

7fx + 8 x HSI

V2.0 October 2011