365SMART SM-06-02030G Original-Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Original-Handbuch für Messgeräte 365SMART SM-06-02030G herunter. 365SMART SM-06-02030G 20 Seiten. Cross line laser cube
line or cross lines.
6. Long time press key button, laser line switch off.
ATTENTION! If the indication light is
red and flash, it indicates the battery
should be change.
8. MAINTRANCE
• The laser tool is sealed and calibrated at the plant
to the accuracy specified.
• It's recommended to carry out a accuracy check
before its first use and periodic checks during
future use especially for precise layouts.
• Do not short any battery terminals or charge alka-
line batteries or dispose of batteries in fire.
• Do not mix old and new batteries. Replace all of
them at the same time with new batteries of the
9. DISPOSAL AND RECYCLING
ATTENTION! This product has been
marked with a symbol relating to
removing electric and electronic
waste. This means that this product
Li-Ion
shall not be discarded with house-
hold waste but that it shall be returned to a col-
lection system which conforms to the European
EN
same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for
several months.
• Do not store the laser tool in direct sunlight or
expose it to high temperatures.
• The housing and some internal parts are made of
plastics and may become deformed at high tem-
peratures.
• Exterior plastic parts may be cleaned with a damp
cloth. Although these parts are solvent resistant,
NEVER use solvents. Use a soft, dry cloth to remove
moisture from the tool before storage.
• Do not dispose of this product with household
waste.
• Always dispose of batteries per local code.
WEEE Directive.
Contact your local authorities or stocks for advice
on recycling. It will then be recycled or disman-
tled in order to reduce the impact on the environ-
ment. Electric and electronic equipment can be
hazardous for the environment and for human
health since they contain hazardous substances.
11