ALLNIC AUDIO L-3000 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken ALLNIC AUDIO L-3000 herunter. ALLNIC AUDIO L-3000 10 Seiten. Line stage preamplifier
Auch für ALLNIC AUDIO L-3000: Benutzerhandbuch (12 seiten), Benutzerhandbuch (11 seiten), Benutzerhandbuch (11 seiten)
Seite drucken
do not introduce microphonic noise into
your system, with the Absorb Gel damping
system, you will enjoy a degree of
transparent sound that will surprise and
please you.
•
Precision attenuator volume control – The
L-7000 does not employ a digital IC
volume control or a lowcost carbon film
volume control with a motor. Allnic Audio
has developed a precision oil clutched
motorized attenuator; the L-7000 has no
(± 0db) channel unbalance at any volume
level.
•
Pure Class A operation
•
Pure balanced operation
•
As are all Allnic Audio products, the L-7000
is fully RoHS (EU Reduction of Hazardous
Substances
regulation)
construction and materials.
WHAT'S IN THE BOX?
Please check that the shipping box contains
the following:
•
One (1) Allnic L-7000 preamplifier – in
natural aluminum or black, depending on
your order specification
•
One remote control
•
2 x AAA batteries for the remote control
•
One (1) Owner's Manual
Note:
1)
The L-7000 ships with the tubes
installed.
2)
The L-7000 will work with most IEC
type aftermarket power cords. Of
course, only you can determine the
power
cord
synergistically with the L-7000 in your
compliant
in
that
works
most
system.
We advise that you keep the box and other
packing materials that your L-7000 came in. It
will be useful if you sell your L-7000 or in the
unlikely event you need to ship it for service.
SAFETY
•
Remove ALL protective cushioning
material inside the tube chimneys
before operation. The tube chimneys
should contain NOTHING except the
tubes.
•
Disconnect the power cord by pulling
the plug, not the cable.
•
Keep the power cord away from any
heat source.
•
Keep the unit away from liquids – do
not allow any liquid to enter the
interior of the unit.
•
When the unit is moved from a cold to
a warm environment, allow sufficient
time
for
evaporate before plugging the unit
into an AC connection.
•
Do not attempt any repairs.
•
Do not remove the chassis cover
without specific authorization from
Allnic Audio USA.
•
See the notes on "Location, Location,
Location".
CLEANING
A.
Chassis and glass
Use only a soft, lint-free cloth dampened
slightly with water only (NO cleaning fluids!)
to clean the faceplate, meter glass and chassis.
B.
Connectors
You may use any good quality contact cleaner
any
condensation
to