Burkert 0131 Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Kontrolleinheit Burkert 0131 herunter. Burkert 0131 16 Seiten. 2/2- or 3/2-way solenoid valve
Auch für Burkert 0131: Betriebsanleitung (16 seiten)

Seite drucken

5.2

Before installation

Installation position: any, actuator preferably upwards.

Procedure:

→

Check pipelines for dirt and clean.

→

Install a dirt filter before the valve inlet (≤ 500 µm).

5.3

Installation

Insert O-ring

Insert

Tighten union nut - evenly by

hand only

NOTE!

Caution risk of breakage!

• Do not use the coil as a lever arm.

→

Body with welded sleeve: Use PVDF.

→

Body with PVC bonded sleeves: Use Tangit special adhesive.

Valve body must not be installed under tension.

Sealing material must not get into the device.

→

Observe direction of flow:

The arrow or letter on the body indicates the direction of flow:

from P → A (NC) or from P → B (NO).

english