Allonge HM-36 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Befeuchten Allonge HM-36 herunter. Allonge HM-36 14 Seiten. Ultrasonic humidifi er

Seite drucken
Setting the Mist Operation:
1.
Press the Power/Mist Setting button. Each time this button is pressed, the
setting cycles and color of light change as per chart below:
H (High)
M (Med)
Mist setting
H (High)
M (Med)
L (Low)
SL (Slow)*
OFF
*
The timer function:
Press the Power/Mist Setting button and when it is set to SL (Slow), it activates
the timer function, which automatically turns the power off after five hours.
The Water indicator button (E):
When the Water indicator (E) is lit RED, this means that the water level in the water
tank is low.
1
After draining any water remaining in the water passage, refi ll the water tank with new clean
tap water.
2
When water reaches the ultrasonic humidifi er from the water tank, the Water indicator (E) will
automatically turn off.
3
Press the Power button to start operation.
Using the Aroma Fragrance Feature
1.
Pull out the felt case from the aroma base holding the ultrasonic humidifier.
Felt case
*
Insert the felt circle so that it fits under the clips in the felt case.
2.
Trickle 2-4 drops of aroma oil or essential oil onto the felt circle located in
the case. (These oils are available commercially). Take care that oil does not
spill outside the case – if some oil spills on the base simply wipe it up before
proceeding. Make sure that the felt circle is fully inserted into the indented
area of the case. Then insert the plastic case all the way inside the ultrasonic
humidifier.
L (Low)
SL (Slow)
Indicator color
GREEN
BLUE
YELLOW (lit)
Flashes YELLOW
NO LIGHT
9
English