ABB ACS880-01 Series Kurzanleitung für Installation und Inbetriebnahme - Seite 10
Blättern Sie online oder laden Sie pdf Kurzanleitung für Installation und Inbetriebnahme für Industrielle Ausrüstung ABB ACS880-01 Series herunter. ABB ACS880-01 Series 17 Seiten. Industrial drives
Auch für ABB ACS880-01 Series: Installationshandbuch (20 seiten), Handbuch zur Schnellinstallation (14 seiten), Handbuch (16 seiten), Benutzerhandbuch (18 seiten)
Seite drucken
13. Start-up the drive
WARNING! Obey these instructions. If you ignore them, injury or death, or damage to the equipment can occur. If
you are not a qualified electrical professional, do not do electrical installation or maintenance work.
Use the control panel to do the start-up procedure. The two commands at the bottom of the display show the functions of
the two softkeys
and
depending on the context. Use the arrow keys
active view. Key
shows a context-sensitive help page.
?
1.
Power up the drive. Make sure that you
have the motor name plate data
available.
4.
Select the language you want to use
and press
(Next).
Note: After you have selected the
language, it takes a few minutes for
the control panel to wake up.
7.
10.
located below the display. The commands assigned to the softkeys are different
,
,
and
2.
The First start assistant guides you
through the first start-up.
Select Menu and press
open the main Menu.
Select Assistants and press
(Select).
5.
Select the localization you want to use
and press
(Next).
8.
11.
to move the cursor or change values depending on the
3.
Select Basic setup and press
(Select).
(Menu) to
6.
Do the following selections. After each,
press
9.
12.
10
(Next).