Alloy LED AL-60-03-0008 Spezifikationen und Anleitungen - Seite 4
Blättern Sie online oder laden Sie pdf Spezifikationen und Anleitungen für Schalter Alloy LED AL-60-03-0008 herunter. Alloy LED AL-60-03-0008 7 Seiten. Led wifi controller hub
Seite drucken
LED WiFi Controller Hub "EasyLighting" Application Instructions
Install the App
Download the LED WiFi Controller Hub application from the Apple app store (the app is called "easylight-
ing easylife" by author Gong Fei) or Google Play by searching for "easylighting".
Set Up the WiFi Hub
Hard-Wired Connection to Router (Recommended):
Connect the WiFi Hub to your router using the included CAT-5 (ethernet) cable.
This will allow you to operate the controller on the same network you use for
the Internet.
1. Open the easylighting application on your smart phone. There will be a mes-
sage saying "wireless device not found" - click OK.
2. Go to "Settings" (P1)
3. Select "Connect WiFi LED controller to your home network" (P1)
4. A dialog box saying "Your mobile phone is already connected to the WiFi con-
troller?" Select "yes", the app will automatically search for the router. (P2) (P3)
5. Choose your router to connect.
6. Enter the WiFi network password and then press OK. (P3) (P4)
Restore the WiFi Settings to the Factory Default Setting
When we connect to the WiFi Hub through an existing WiFi network, Easylighting will not appear in the list of available networks un-
less we reset the router. Then we can use this button to restore the WiFi controller to factory settings. (This function is only used when
connecting to an existing WiFi network).
1. Connect to the existing WiFi network and make sure the WiFi Hub is already configured to this network.
'Easylighting' application manual:
2. Go to "Settings" (P1)
Configure
3. Select "Restore WiFi settings to factory default settings." (P6)
4. Press yes. A dialog box will indicate that it has successfully restored factory settings. Press "OK" (P7)
5. After around 1 minute, Easylighting will appear in the network list again. (P8)
P1
P2
Connect WiFi LED controller to your home network
1)Search and connect the Easylighting
2)Enter easylighting application
3)Short press setting button
4)Short press
(P1)
5)Press yes
, it will search all the router around automatically(P2,P3)
6)Choose router we want connect
7)Enter password and then press OK
www.AlloyLED.com
Page 4 of 7
Use direct EasyLighting connection with the WiFi LED
controller
®
®
P3
(P1)
(P3.P4)
|
Call: 800.910.LEDS [5337]
To Connect Wirelessly to the WiFi LED Controller:
This will operate the controller on its own network
and requires your mobile device to be disconnected
from other wireless networks.
P4
P5
Restore WiFi settings to factory default setting
1)Connect exist WIFI and make sure WIFI controller already be
configure to this network
2)Enter the setting interface
3)Short press
| Text: 510.400.6690
3)Press yes; it will indicate successful restore factory setting.(P6)
4)Press ok, after around 1 minute, Easylighting will can be found in
network list again.(P7.P8)
1. Open the easylighting application on your
smart phone. There will be a message saying
"wireless device not found" - click OK.
2. Go to "Settings" (P1)
3. Press "Use direct EasyLighting connection to
the WiFi LED controller." (P1)
4. Press yes. (P2)
P6
P7
Continued on next page
.(P1)
|
P8
v2.3