Dialogic IMG 1004 Schnellstart-Handbuch - Seite 10
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Gateway Dialogic IMG 1004 herunter. Dialogic IMG 1004 10 Seiten. Integrated media gateway
Auch für Dialogic IMG 1004: Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (8 seiten)
Seite drucken
Dialogic IMG 1004 Integrated Media Gateway Quick Start Guide
Connecting TDM Signaling and Bearer Ports
The Bearer ports (Interface Offsets) 0-4 are connected to the TDM network. Each
Bearer Port can have signaling and bearer channels configured on it.
ISDN D-channels and B-Channels are brought in over the Bearer Ports
CAS signaling and voice channels are brought in over the Bearer Ports
SS7 Links are brought in over Bearer Ports.
Starting ClientView to start Configuring Switch
Once the IMG 1004 has software installed, the cabling is connected, and the GCEMS server
has been configured, the ClientView application can be used to configure the system. Below
are a few topics from the Online Documentation to get started on configuring the IMG 1004
through the ClientView GUI.
Configuration > ClientView > (All topics under this book)
Configuration > Introduction
Configuration > Node Configuration Wizard
Configuration > Basic Configuration
From here, the IMG 1004 can be configured for your network. Use the Online Manual for
configuration, Clientview, and ClientView Pane sections to configure the IMG 1004.
10