Dialogic IMG 1010 Schnellstart-Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Gateway Dialogic IMG 1010 herunter. Dialogic IMG 1010 11 Seiten. Connecting dc power
Auch für Dialogic IMG 1010: Installationsanleitung Handbuch (6 seiten), Schnellstart-Handbuch (18 seiten), Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (10 seiten), Installationsanleitung Handbuch (9 seiten), Schnellstart-Handbuch (4 seiten)

Dialogic IMG 1010 Integrated Media Gateway Quick Start Guide

Connecting and Configuring Network Management Port

'CTRL 0'

The information below will provide the user with a basic setup sequence for connecting and

configuring the IMG 1010 along with the GCEMS server to download system software and

start configuring the IMG 1010 using the ClientView GUI. On the rear of the IMG 1010 are

the network interfaces. The first interface -CTRL 0- is a Fast Ethernet port dedicated to

network management. This port is connected to the GCEMS server and allows the GCEMS

server to access the IMG 1010.

1. Connect up the cables as shown in the first figure below.

2. Once the cables are connected, configure FTP and DHCP on the GCEMS server.

Locate the MAC address that is printed on a label located on the underside rear of

the IMG 1010. This will be used in the dhcpd.conf file creation.

For more information on how to set up the services above refer to the topics under the

following sections in the online documentation.

IMG 1010-Installation and Setup Guide > IMG 1010-Software Installation and

Setup

If your setup requires using an SD card to load system software refer to the topics under

the IMG 1010-SD Card heading below in Online Documentation.

IMG 1010-Installation and Setup Guide > IMG 1010-SD Card