AllPondSolutions 4500PP Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Water Pump AllPondSolutions 4500PP herunter. AllPondSolutions 4500PP 13 Seiten. Pond & aquarium

INSTALLATION & USE

The All Pond Solutions PP pump range can be used to circulate water, pump to

and from a separate ﬁltration system or water features using suitable ﬂexible

hose (ﬂexible hosing sold separately).

Please read the below instructions carefully before beginning to set up your

pump. DO NOT CONNECT THE UNIT TO THE MAINS UNTIL SET UP IS

COMPLETE AND UNIT IS FILLED WITH WATER.

1. Connect the required attachments - make sure

the O-rings is added to the outlet hosetail (see image

on the right for reference). This will prevent leakage.

2. Connect your outlet pipe to either your ﬁlter, water

feature or alternative location. Secure the outlet pipe

using the included nut and ensure this is tight and

secure.

You can add ﬁlter foam (sold separately) to the inlet of

the PP. This may slow down your ﬂow rate but will

ensure you pick up larger dirt particles before this

enters your pump/ﬁlter system.

3. If you need to connect the inlet pipe you can

remove the front case cap before attaching the hose.