ABB AFS670 Sicherheitshinweise - Seite 12
Blättern Sie online oder laden Sie pdf Sicherheitshinweise für Industrielle Ausrüstung ABB AFS670 herunter. ABB AFS670 18 Seiten. Precautions and safety, equipment handling advices
AFS670 | PRECAUTIONS AND SAFETY
CAUTION
CAUTION
NOTICE
NOTICE
NOTICE
NOTICE
NOTICE
2019-04-30
Non-observance could result in minor or moderate injury.
Be aware of the weight of the equipment.
→ Think about an auxiliary construction to hold the equipment in its place
until it is fixed in a proper manner.
Non-observance could result in minor or moderate injury.
After usage the equipment must be disposed of properly as electronic waste
according to WEEE (waste of electronic and electric equipment), in accor-
dance with the local applicable disposal regulations.
→ The equipment must not be disposed of with domestic waste.
→ Only a reputable and competent recycling company should deal with the
equipment, which may contain items that could be hazardous during dis-
mantling operations.
Non-observance could result in equipment damage.
Unrestricted access to the equipment premises holds a risk of damaged
equipment and disrupted services.
→ Install and operate the equipment in a room that is normally closed and
not generally accessible.
Non-observance could result in equipment damage.
The AFS670V20 user manuals should be read and clearly understood before
working with the equipment.
Non-observance could result in equipment damage.
Equipment has a high power dissipation. Insufficient ventilation causes hot
spots and overheating on the equipment. Overheating holds a high risk for
damage of the equipment.
→ A sufficient ventilation or cooling and ventilation must be provided by the
operator for the equipment that guarantees for a maximum ambient tem-
perature. See installation guide for more details.
Non-observance could result in equipment damage.
Obstructed airflow may lead to overheating and damage of your equipment.
→ Make sure there is a least 10 cm of space in front of the ventilation slits of
the casting.
→ Cables should be positioned so as not to block the airflow into the equip-
ment.
Non-observance could result in equipment damage.
High ambient temperature caused by other equipment may lead to overheat-
ing of the equipment.
→ When installing the device, make sure there is at least one free rack space
(approx. 5cm) above the device, because heat is discharged via the hous-
ing of the device.
SAFETY ADVICES
12