DiamaPro Systems SVX2+A Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Staubsauger DiamaPro Systems SVX2+A herunter. DiamaPro Systems SVX2+A 15 Seiten. Industrial vacuum
Seite drucken
1. INTRODUCTION
Thank you for purchasing a DIAMAPRO
provides information and procedures to safely operate and maintain the
DiamaPro
SVX2+A. For your own safety and protection from injury, care-
®
fully read, understand, and observe the safety instructions described in this
manual. Keep this manual or a copy of it with the machine. If you lose this
manual or need an additional copy, please contact DiamaPro
This machine is designed and built with user safety in mind; however, it
can present hazards if improperly operated and serviced.
Please follow the operating instructions carefully. If there are any questions
regarding operating or servicing of this machine, please contact
DiamaPro
Systems.
®
Disclaimer: DiamaPro
Systems and its affiliates take no responsibility
®
for any damage, injury or death resulting from the incorrect or unsafe use
of this product. Use of this product should be undertaken by competent
persons only. It is the operator's responsibility to ensure that the following
safety procedures are followed. If you are unsure, do not operate this
product.
IT IS NECESSARY THAT THE AUTHORIZED
PERSONNEL AND MACHINE OPERATOR HAVE READ
AND UNDERSTOOD THE MANUAL BEFORE USING
THE MACHINE.
2. WARRANTY
DiamaPro
SVX model vacuums are warranted to be free from
®
manufacturing defects in normal service for a period of one or two years
from the date of purchase by the original consumer purchaser. Component
manufacturers offer separate warranty periods. Call 470-977-2323 for
complete information.
DiamaPro
System's obligation under this warranty is expressly limited to
®
the replacement of such part or parts as inspection shall disclose to have
been defective.
This warranty does not apply to defects caused by damage, unreasonable
use, faulty repairs made by others or defects caused by failure to provide
reasonable maintenance.
Further, the warranty is void if the product, or any of its components, is
altered or modified by the consumer or if the product is used in an inappro-
priate manner or with equipment not recommended by the manufacturer.
Wear items are not covered under warranty: examples include: belts,
wheels, casters, bearings, cart wheels, filters, wear pads, spark plugs,
hoses, wands and squeegees, motors, etc.
To qualify for warranty coverage, DiamaPro
tered within 30 days of purchase. Registration can be completed online at
www.DiamaProSystems.com.
To request your warranty service you MUST send a written request to:
DiamaPro
P.O. Box 19946
Charlotte, NC, 28219
including the manufacturing details that can be found on a plate fitted
inside your machine together with a copy of the invoice.
The warranty is invalid under the following conditions:
• Improper use of the machine or total or partial failure to comply with the
contents of this manual
• Any part of the vacuum cleaner is altered or modified in any way
• Incorrect electrical installation
• If the laws in the country of use are not respected
• Inadequate maintenance
• The machine has not undergone routine maintenance as specified in this
manual
• Use of spare parts that are not produced by DiamaPro
indicated for the model in use
• Partial or total failure to comply with the instructions given in this manual
SYSTEMS product. This manual
®
Systems.
®
SVX vacuums must be regis-
®
®
Systems
or not specifically
®
3. UNINTENDED USE
• Do not use the machine for sucking up liquid material
• Do not use the machine or expose the machine to water, rain, or rain-like
environments
• Do not use the machine with improper extension cords or extension cords
of improper length
4. MACHINE DATA
4.1 TECHNICAL DATA PLATE
Every DiamaPro machine carries a registration plate showing essential
details that are necessary when contacting the supplier/manufacturer for
advice, suggestions or information on spare parts. The following details are
included on the plate:
• Manufacturer
• Model
• Supply voltage
• Installed rated power
• CE symbol (built in compliance with Machinery Directive 2006/42/EEC)
4.2 SAFETY DEVICE
The vacuum cleaner has been manufactured in compliance with all legal
standards for the operator's safety.
• All metal components are grounded to eliminate shock or electrostatic
discharge, including the flexible suction hose that is properly grounded.
Also in this regard the choice of a suitable flexible suction hose allows to
eliminate this risk on the hose length that goes from the use area to the
vacuum cleaner.
• The brakes fitted onto the anterior pivoting casters safely fix the machine
in its place of use where there may be a risk of movement due to uneven
floor surfaces or other particular working conditions.
BEFORE USING THE MACHINE CHECK THAT THE
MACHINE HAS NOT SUFFERED ANY SHOCKS OR
DAMAGES DURING THE TRANSPORT THAT CAN
AFFECT THE OPERATION OF THE ABOVE DEVICES
5. PERFORMANCE TOLERANCES
The performance of the machine may vary based upon environmental
factors such as temperature, air pressure, humidity, etc.