DiamaPro Systems SVX2-M Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Staubsauger DiamaPro Systems SVX2-M herunter. DiamaPro Systems SVX2-M 8 Seiten. Industrial vacuum

Seite drucken

1. INTRODUCTION

This user and maintenance manual will set out the guidelines and proce-

dures that must be followed by those operating this equipment in order to

guarantee:

• Operators' safety

• Correct use of the machine

• Optimum performance

IT IS NECESSARY THAT THE AUTHORIZED PERSON-

NEL AND MACHINE OPERATOR HAVE READ AND

UNDERSTOOD THE MANUAL BEFORE USING THE

MACHINE.

Due to the importance of this information, we recommend that the opera-

tor:

• Always keeps this manual close at hand for easy consultation

• Keeps the manual in a safe place in order to prevent loss or damage

• Asks the manufacturer/supplier for a replacement copy in case of loss or

damage

• Supplies this manual and the manufacturer's details together with the

machine if it is sold to a third party

IF THE PURCHASED VACUUM CLEANER IS ATEX

AUTHORIZED, THE TECHNICAL PLATE ATTACHED TO

THE ENGINE HAS A SERIAL NUMBER THAT IS USED

FOR REQUESTING A COPY OF THE CERTIFICATE IF

THIS IS DETERIORATED OR LOST.

The manufacturer reserves the right to update its products and manuals

and is not required to provide updated versions of the them.

2. WARRANTY

The vacuum cleaners manufactured by DiamaPro have been fully inspect-

ed to guarantee correct electrical, pneumatic and mechanical function.

The vacuum cleaners are covered by a 12-month warranty. All defective

parts of the machine are covered by warranty but this does not include

parts damaged during shipping, handling or use nor does it cover parts

damaged by normal wear and tear.

Repairs can be carried out by an authorized service center or directly by

DiamaPro.

To request your warranty service you MUST send a written request to the

dealer or directly to the manufacturer including the manufacturing details

that can be found on a plate fitted inside your machine together with a

copy of the invoice.

The warranty is valid under the following conditions:

• Improper use of the machine or total or partial failure to comply with the

contents of this manual

• Any part of the vacuum cleaner is altered or modified in any way

• Incorrect electrical installation

• If the laws in the country of use are not respected

• Inadequate maintenance

• The machine has not undergone routine maintenance as specified in this

manual

• Use of spare parts that are not produced by DiamaPro or not specifically

indicated for the model in use

• Partial or total failure to comply with the instructions given in this manual

3. UNINTENDED USE

• Never suck up cigarette butts that have not been properly put out and/or

any other flammable materials

• Never suck up substances that may explode in contact with the air

• Never operate in environments where explosive gases and/or gases from

toxic chemical products are present in the air

• Check the suitability of the cartridge filter before sucking up toxic sub-

stances

• Disconnect from the power outlet before accessing any electrical compo-

nents of the machine

• Do not modify the machine in any way

• Do not use the machine in a way that does not comply with the require-

ments of this manual

4. MACHINE DATA

4.1 TECHNICAL DATA PLATE

Every DiamaPro machine carries a registration plate showing essential

details that are necessary when contacting the supplier/manufacturer for

advice, suggestions or information on spare parts. The following details are

included on the plate:

• Manufacturer

• Model

• Supply voltage

• Installed rated power

• CE symbol (built in compliance with Machinery Directive 2006/42/EEC)

4.2 TESTING

All DiamaPro machines are tested before packaging and delivery in order

to ensure the correct function of each component. An accurate electrical

safety test is carried out in compliance with specific electric safety stan-

dards related to:

• Ground continuity test

• Insulation resistance test between every phase and the ground

• Dielectric test

• Measurement of dispersed current

• Measurement of power and absorbed current (acceptable difference of

+/-10% of rated value)

• Measurement of maximum depression and air exhaust values (tolerance

of +/-15% based on temperature values and humidity of environment)

• Measurement of maximum air absorption

4.3 SAFETY DEVICE

The vacuum cleaner has been manufactured in compliance with all legal

standards for the operator's safety.

• All metal components are grounded to eliminate shock or electrostatic

discharge, including the flexible suction hose that is properly grounded.

Also in this regard the choice of a suitable flexible suction hose allows to

eliminate this risk on the hose length that goes from the use area to the

vacuum cleaner.

• The brakes fitted onto the anterior pivoting casters safely fix the machine

in its place of use where there may be a risk of movement due to uneven

floor surfaces or other particular working conditions.

BEFORE USING THE MACHINE CHECK THAT THE

MACHINE HAS NOT SUFFERED ANY SHOCKS OR

DAMAGES DURING THE TRANSPORT THAT CAN

AFFECT THE OPERATION OF THE ABOVE DEVICES

5. PERFORMANCE TOLERANCES

The performance of the turbine may vary by 15% based on the tempera-

ture and air humidity.

The safety valves are calibrated based on the amperage of the turbine.

6. SAFETY PROVISIONS

• Carefully read the instructions in this manual before starting, using, ser-

vicing or operating the vacuum cleaner

• Check that the vacuum cleaner hasn't been damaged in any way

• Never turn on the machine if it is faulty or if you suspect it is faulty

• Check that the switch isn't worn or damaged

• Do not approach the suction intake of the machine with unfastened or

broken garments that could easily be sucked into the machine

• Check that the filters are present and efficient

• Make sure that the filters are installed correctly and in full working order,

always observing the regulations in force in the workplace

• Do not carry out repairs without the manufacturer's authorization

• Never use gasoline, solvents or other flammable liquids for cleaning; only

proper detergents should be used for cleaning

• Never move the machine by pulling the power cable or flexible hose

• Never direct the opening of the machine or the flexible tube towards

people or animals

• Protect the machine from the rain

• Check that the machine is connected to a power source with the correct

voltage indicated on the registration plate

• Make sure that the power cable has no wear or damage. If replacing the

cable, always replace it with another of the same specifications as the orig-

inal one: cables that are not approved or of inferior quality may overheat

and cause serious injury to the user