DiamaPro Systems DEMON JR. Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Bodenmaschine DiamaPro Systems DEMON JR. herunter. DiamaPro Systems DEMON JR. 9 Seiten.
To obtain consistent performance over the life of your equipment, read though these instructions and save them for future reference.
If you require service, contact the dealer from which the machine was purchased or an authorized service station. Always refer to your
limited Warranty for complete service information.
The model, type, and serial number are indicated on the data plate on the side of the handle. From prompt and complete service, refer
to these numbers when inquiring about service.
• Twin (dual) capacitor 180 frame TEFC (Totally Enclosed Fan-
Cooled) motor keeps out dirt and dust for longer motor life.
• Extra heavy duty spring steel cord strain relief with a 2-piece
12-3 power cord
• Low current draw
• Thumb operated safety switch
• Negative pressure on/off switch
• Dual steel operating triggers for left or right hand operation
• One-piece industrial powder coated heavy duty steel handle
for optimum durability
Your Demon is equipped with a safety switch lock and power
switch triggers designed for your safety. Do not attempt to bypass
or defeat the safety switch lock. Never use any device to lock the
power switch triggers in the "ON" position.
• Do not leave the Demon plugged in. Turn off the switch and
unplug the electrical cord when not in use and before servicing or
changing the brushes or pads.
• Do not allow the machine to be used as a toy. Close attention
is necessary when used near children. Do not leave the machine
connected to an electrical outlet unattended.
• Use only as described in this manual. Use only manufacturer's
recommended attachments.
• Do not use with a damaged cord or plug. If the machine is not
working as it should, has been dropped, damaged, or left out-
doors, return it to a service center before using.
• Use care to keep the electrical supply cord around sharp edges
or corners. Keep the cord away from the heated surfaces.
• Connect to properly grounded (3-wire) outlet only. Refer to
Grounding Instructions.
• Do not use extension cords or outlets with inadequate current
carrying capacity.
• Turn off all controls before unplugging.
SERVICE INFORMATION
SPECIFICATIONS
MODEL
DEMON JR.
Part #
DPDMNJR17HD
Machine Size
17 in
Pad Size
16 in
Pad Speed
165 RPM
Amp Draw
7.9
Motor
1.5 HP, 180 frame, TEFC dual capacitor AC motor
Drive System
Triple-Planetary XHD 11:1 helical cut industrial gears
Power
115-230V, 60 Hz power
Power Cord
50 2-part, 12-3 SJTOW industrial power cord
dB Rating
66 dB - Meets GS42 standard
FEATURES
IMPORTANT SAFETY INSTRUCTIONS
DEMON
DPDMN17
20 in
19 in
165 RPM
8.5
ALL SIZES
• Welded frame for rugged, reliable performance
• 8" Non-marking, 2X8, ball bearing wheels
• Multiple position handle adjustment for operator comfort
and safety
• Comfort style vinyl handle grips for ease of use
Revolutionary Design that Utilizes......
• Floating head to insure 100% pad contact at all times
• Low Profile
• Quick handle/Carriage Removal
ELECTRIC SHOCK CAN CAUSE SERIOUS INJU-
RY OR BE FATAL. PLEASE READ THE FOLLOW-
ING INSTRUCTIONS ON THE USE AND OPERA-
TIONS OF FLOOR FINISHING MACHINES.
• Do not unplug by pulling on the cord. To unplug, grasp the plug
and pull.
• Do not handle the plug or Demon with wet hands.
• Wind the cord no tighter than is necessary to retain it during
storage. Refer to Cord Storage.
• Use extra care when working on or near stairs.
• Do not use in conjunction with flammable or combustible liquids
such as gasoline, or use in areas where explosive vapor or dust
may be present.
• Store your Demon indoors in a cool, dry area.
• Keep your work area well lighted.
• WARNING: To avoid electrical shock, use indoor only.
RISK OF EXPLOSION. FLOOR SANDING MA-
CHINE CAN RESULT IN AN EXPLOSIVE MIX-
TURE OF FINE DUST AND AIR. USE FLOOR
SANDING MACHINE ONLY IN A WELL-VENTILAT-
ED AREA, FREE FROM ANY FLAME OR MATCH