Miller AMD-115G Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schweißen System Miller AMD-115G herunter. Miller AMD-115G 24 Seiten.
Auch für Miller AMD-115G: Benutzerhandbuch (28 seiten)

Seite drucken
Miller AMD-115G Benutzerhandbuch

3-5. Motor Mounting And Gun, Weld Cable, And Gas Connections

6
Tools Needed:
9/16, 5/8 in
4
5
8
Return To Table Of Contents
1
3
2
7
802 869 / Ref. 153 072 / Ref. 156 928-D / Ref. 801 443-B
.
Drive motor must be isolated
from weld potential.
1
Insulator Plate
When mounting motor,
place
factory-supplied insulator plate
under motor mounting bracket to
provide isolation.
2
Customer Supplied Gas Hose
3
Shielding Gas Valve Fitting
Requires hose fitting with 5/8-18
right-hand threads.
For guns requiring external gas
connections, remove hose from
barbed fitting near gun/feeder
opening and connect to gun.
4
Gun/Feeder Securing Knob
5
Gun/Feeder Opening
6
Gun End
Loosen knob. Insert gun end into
opening. Position as close as pos-
sible to drive rolls without touching.
Tighten knob.
7
Weld Cable Terminal
8
Weld Cable
Select and prepare weld cable ac-
cording to welding power source
Owner's Manual.
For guns with external weld cable,
connect weld cable from gun to ter-
minal.
OM-179 082 Page 11