Miller Auto Deltaweld 452 Benutzerhandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schweißen System Miller Auto Deltaweld 452 herunter. Miller Auto Deltaweld 452 42 Seiten. 60 hz, 50/60 hz arc welding power source
Auch für Miller Auto Deltaweld 452: Benutzerhandbuch (30 seiten), Benutzerhandbuch (40 seiten)

Seite drucken
Miller Auto Deltaweld 452 Benutzerhandbuch

5-1. Controls (Non CE Models)

6
1
Voltage Adjustment Control
Turn control clockwise to increase voltage.
Voltmeter value changes as control knob is
turned. Control can be adjusted while welding.
2
Digital Meters
Voltmeter displays preset voltage with contac-
tor off. Voltmeter and ammeter display actual
output voltage and amperage with contactor
on.

5-2. Controls (CE Models)

6
1
Voltage Adjustment Control
Turn control clockwise to increase voltage.
Voltmeter value changes as control knob is
turned. Control can be adjusted while welding.
2
Digital Meters
Voltmeter displays preset voltage with contac-
tor off. Voltmeter and ammeter display actual
output voltage and amperage with contactor
on.
OM-223 Page 22
SECTION 5 − OPERATION
5
3
Power Switch With Indicator Light
4
High Temperature Shutdown Light
5
Remote Voltage Control Switch
For front panel control, place switch in Panel
position. For remote control, place switch in
Remote position, and connect remote device
(see Section 4-9).
6
Output Switch
5
3
Power Switch With Indicator Light
4
High Temperature Shutdown Light
5
Remote Voltage Control Switch
For front panel control, place switch in Panel
position. For remote control, place switch in
Remote position, and connect remote device
(see Section 4-9).
6
Output Switch
Return To Table Of Contents
1
4
For front panel control of output, place switch
in Panel position. For remote control of output,
place switch in Remote position, and connect
remote device (see Section 4-9).
Y Weld output studs are energized only
when Output switch is in On position,
or while welding.
Y Turn Off power before connecting re-
mote device.
1
4
For front panel control of output, place switch
in Panel position. For remote control of output,
place switch in Remote position, and connect
remote device (see Section 4-9).
Y Weld output studs are energized only
when Output switch is in On position,
or while welding.
Y Turn Off power before connecting re-
mote device.
2
3
Ref. ST-162 503-C
2
3
Ref. ST-173 449-B