Miller Coolmate 3.5 CE Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schweißen System Miller Coolmate 3.5 CE herunter. Miller Coolmate 3.5 CE 20 Seiten.

6-3. Troubleshooting

Trouble

Coolant system does not work.

Decreased or no coolant flow.

SECTION 7 − ELECTRICAL DIAGRAM

Dia.

Part

Mkgs.

No.

. . . . . . . . . . . . . . . .

257415

OM-231313 Page 12

A complete Parts List is available at www.MillerWelds.com

Be sure input power cord is plugged in to energized receptacle.

Check line fuses or circuit breaker, and replace or reset if necessary.

Motor overheated. Unit starts running when motor has cooled.

Have Factory Authorized Service Agent check Power switch S1 and motor (Mot).

Add coolant.

Check for clogged hoses or coolant filter. Clean filter or clean / replace hoses if necessary.

Disconnect pump, and check for sheared coupling. Replace coupling if necessary.

SECTION 8 − PARTS LIST

Description

Recommended Spare Parts

. . . .

Screen, Filter

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remedy

228525-D

Quantity