aquanta AQ-CA-G100-ESL Installationsanleitung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Zubehör für Warmwasserbereiter aquanta AQ-CA-G100-ESL herunter. aquanta AQ-CA-G100-ESL 12 Seiten. Smart water heater controller for natural gas water heaters
Seite drucken5. Holding the supplied mounting bracket in place, mark the
location of the screw holes and drill two
holes. Use the two supplied ½ inch long silver sheet metal
screws to secure the mounting bracket in place.
7. Place the Aquanta Controller on the bracket by sliding the
two plastic tabs on the controller through the two slotted
holes on the mounting bracket and pressing down. Then
secure the Aquanta Controller to the mounting bracket
using one black Phillips head screw (supplied).
8. For atmospheric-vented water heaters, connect the
supplied communications cable to the top connector port
on the right side of the Aquanta Controller. Then connect
the other end of the communications cable to the "COM"
port on the water heater gas valve. Then turn the gas
control knob from PILOT to the original setting that you
previously noted.
9. For power-vented water heaters, plug the power cord for the water heater into the
AC power receptacle on the left side of the Aquanta Controller.
inch pilot
th
1/8
5