Miller Welding Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schweißen System Miller Welding herunter. Miller Welding 33 Seiten. For arc welding and cutting the safe way
Auch für Miller Welding: Sicherheits-Quick-Manual (16 seiten)

Seite drucken

SECTION 1 – SAFETY PRECAUTIONS AND SIGNAL WORDS

1-1.

GENERAL INFORMATION AND SAFETY

A. General

Information presented in this manual and on various la-

bels, tags, and plates on the unit pertains to equipment

design, installation, operation, maintenance, and trou-

bleshooting which should be read, understood, and fol-

lowed for the safe and effective use of this equipment.

B. Safety

The installation, operation, maintenance, and trouble-

shooting of plasma arc welding equipment requires

practices and procedures which ensure personal safety

and the safety of others.

Read and follow safety information in the Plasma Weld-

ing Console Owner's Manual and Welding Torch Own-

er's Manual, as well as the other Owner's Manuals for

this system, to ensure the safe installation and operation

of the Plasma Arc Welding system.

2-1.

DESCRIPTION

The robot PAW interface panel is a control designed to

be used with a Thermal Dynamics WC 100B plasma

Plug PLG21 Connects

To Computer Interface

Receptacle RC8

(See Section 3-7)

Gas Set/Pilot Arc

Start Push Button

Receptacle RC21

(See Section 3-8)

Receptacle RC20

(See Section 3-8)

SECTION 2 – INTRODUCTION

SECTION 3 – INSTALLATION

PAW Interface

Panel

Figure 3-1. PAW Interface Panel

1-2.

SAFETY ALERT SYMBOL AND SIGNAL

WORDS

The following safety alert symbol and signal words are

used throughout this manual to call attention to and

identify different levels of hazard and special instruc-

tions.

This safety alert symbol is used with the signal

words WARNING and CAUTION to call atten-

tion to the safety statements.

WARNING statements identify procedures or

practices which must be followed to avoid seri-

ous personal injury or loss of life.

CAUTION statements identify procedures or

practices which must be followed to avoid minor

personal injury or damage to this equipment.

IMPORTANT statements identify special instructions

necessary for the most efficient operation of this equip-

ment.

welding console and a plasma arc welding torch

PWM-3A, MILLER Computer Interface, and MRH

MRV

robot system for the Plasma Arc Welding (PAW)

process.

Computer Interface

Input Power Receptacle RC11

Location (See Section 3-9 And

Computer Interface Owner's Manual)

Computer

Interface

ST-800 732

OM-169 510 Page 1