Miller XMT 300 CC/TIG Benutzerhandbuch - Seite 44

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schweißen System Miller XMT 300 CC/TIG herunter. Miller XMT 300 CC/TIG 44 Seiten.

Seite drucken
Miller XMT 300 CC/TIG Benutzerhandbuch
OPTIONS
AND ACCESSORIES
XMT
ECONOMY
CART
(#134 505)
Small and
lightweight.
Slanted for
convenient
access
to
front
panel
controls.
Storage
compartment
for
gloves,
helmet,
etc.
XMT WIRE FEEDER
QUICK
DISCONNECT
(#042 491)
Attaches S-21 E
or
S-22A wire
feeder
to XMT
case.
XMT CYLINDER CART
(#042 537)
Has
adjustable
handles and is
slanted for convenient
access
to
power
source
front
panel
controls.
Carries
two 160
lb.
(72.6 kg)
gas
cylinders,
or one
gas
cylinder
and
one
coolant
system
for GTAW
(TIG) welding.
Feeder mounted
to
tray
above power
source.
Can be
used with the
Maxtron~,
Miller Arc
Pak~
or
XMl inverter power
supplies.
Also accommodates
Radiator, Watermate~,
or
CooImate~ coolant
systems.
UNIVERSAL CARRYING CART
AND CYLINDER RACK
(#042 934)
Accommodates any XMT power
source,
plus
gas
cylinder
up
to 56
in.
(142.2 cm) high measuring
6 to
9 inches
(15.2
to 22.8
cm)
in
diameter. Also
provides
storage
for
auxiliary
items such
as
electrodes,
helmets,
gloves,
etc.
Can also be
used with
Econotig~,
Maxstarfi
Series,
Millermaticfi 130 and
Millermaticfi 150 power
sources.
BACK-LIT LCD DIGITAL
METERS
(#042
518
Field)
Allows
presettability
and real time
display
of
voltage
and amperage.
Presetting welding
current
and
voltage helps
to
provide optimum
welding
conditions. Meters feature
a
hold
function
that allows
operator
to
read actual weld values
after
welding
is
stopped.
Weld
setting
is held for 15 seconds
before
meter
is
automatically
cleared. Meters
are
easy
to
read in
indoor
or
outdoor
environment.
XMT INVERTER POWER
SOURCES VIDEOTAPE
(#137 760)
An 8 minute VHS
videotape
describing
the XMT
family
of
inverter power
sources.
MILLER EXPERT PROGRAM~
(#042 623)
Easy-to-use computerized
software program used
to
diagnose
and service the power
source.
For detailed
information,
reference Miller
Expert Program
Literature Index No. AV/6.0.
Note: The serial number of the power
source
and diskette
size
(5-1/4
or
3-1/2
in.)
must be
specified
when
ordering
any
Miller
Expert Program
diskette.
INTERNATIONALSTYLE
CONNECTORS
(will
accept DinseTM
or
other International
connectors.)
All XMT
power
sources are
equipped
with International-
style
connectors
for
secondary
connections.
(Power
source
is
shipped
with
two
-50
mm
male
International-style plugs
for
use
with #1
or
#2
AWG size
cable.)
INTERNATIONAL-STYLE
CONNECTOR KIT
(#042418)50
mm
Accepts
#1
or
#2
AWG cable size.
Required
if male
plugs shipped
with power
source
must
be
replaced,
if additional
plugs
are
needed.
(#042 533)
70
mm
Accepts
#1/0
or
#2/0 AWG cable
size.
Required
if #1/0
or
#2/0 AWG
size cable is
to
be used.
Kit includes
one
International-style
male
plug
which attaches
to
the
work and/or weld cables and
plugs
into the International
style
receptacles
on
the power
source.
EXTENSION KIT FOR
INTERNATIONAL-STYLE CABLE
CONNECTORS
Used
to
adapt
or
extend weld
and/or work cables.
Kit includes
one
male
International-style plug
and
one
in-line female
International-style
receptacle.
(#042 419)
50
mm
Accepts
#1
or
#2
AWG size cable.
(#042 534)
70
mm
Accepts
#1/0
or
#2/0 AWG size
cable.
INTERNATIONAL/TWECOfi
ADAPTER
(#042 465)
A
one-piece adapter
which has
an
International-style
male
plug (to
power
source)
on one
end and
a
female Tweco
receptacle (for
weld
cable
connection)
on
other end.
INTERNATIONAL/CAM-LOK
ADAPTER
(#042 466)
A
one-piece adapter
which has
an
International-style
male
plug (to
power
source)
on one
end and
a
Cam-Lok
receptacle (for
weld
cable
connection)
on
other end.
INTERNATIONALJTIG
TORCH
CONNECTOR
Required
for direct connection of
water-cooled torches
or
air-cooled
torches with
a
one-piece
cable
assembly.
Kit includes gas
hose,
gas
hose
fitting,
and
International-style
TIG
Block.
(#135 492)
For 80
Amp,
air-cooled torch with
one-piece
cable
assembly.
(#135 493)
For 150
Amp,
air-cooled torch with
one-piece
cable
assembly.
(#135 494)
For 200
Amp,
air-cooled torch with
one-piece
cable
assembly.
(#135 495)
For 250/300
Amp,
water-cooled
torch with
one-piece
cable
assembly.
9n4