Burkert 2103 Series Schnellstart-Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Ventil-Stellungsregler Burkert 2103 Series herunter. Burkert 2103 Series 19 Seiten. Remote-positioner, installation on process valves with internal air flow
Auch für Burkert 2103 Series: Zusätzliche Anweisungen (12 seiten)
Seite drucken
Type 2103, 2104, 2105
Basic safety instructions
3
BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations, whereby the operator is responsible for
their compliance, by the installation personnel too.
Danger – high pressure.
▶ Before loosening the lines and valves, turn off the pressure
and vent the lines.
Danger of bursting from overpressure.
▶ Observe the specifications on the type label for maximal
control and medium pressure.
▶ Observe permitted medium temperature.
Risk of injury from electric shock (when electrical component
installed).
▶ Before reaching into the device or the equipment, switch off
the power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety regulations
for electrical equipment!
Risk of injury when opening the actuator!
The actuator contains a tensioned spring. If the actuator is
opened, there is a risk of injury from the spring jumping out!
▶ Do not open the actuator.
Risk of injury from moving parts in the device!
▶ Do not reach into openings.
▶ Operate 3-position actuator with transparent cap only.
Risk of burns and risk of fire if used continuously through hot
device surface.
▶ Keep the device away from highly flammable substances and
media and do not touch with bare hands.
Danger due to loud noises.
▶ Depending on the operating conditions, the device may generate
loud noises. More detailed information on the likelihood of loud
noises is available from the relevant sales office.
▶ Wear hearing protection when in the vicinity of the device.
Leaking medium when the diaphragm is worn.
▶ Regularly check relief bore for leaking medium.
▶ If medium is leaking out of the relief bore, change the diaphragm.
▶ If the media is hazardous, protect the area surrounding the dis-
charge point against dangers.
english
5