Burkert 2300 Series Zusätzliche Anweisungen - Seite 9
Blättern Sie online oder laden Sie pdf Zusätzliche Anweisungen für Ventil-Stellungsregler Burkert 2300 Series herunter. Burkert 2300 Series 12 Seiten. Remote-positioner, installation on process valves with internal air flow
Auch für Burkert 2300 Series: Betriebsanleitung (12 seiten), Schnellstart-Handbuch (19 seiten)
Seite drucken
Type 8635, Remote-Positioner
→ When tightening the cable gland, note the position of the
plug-in connection. See marked area in the following "Fig. 12".
NOTE!
The cable in the housing must have a minimum length, but
must not be under tension.
Fig. 12: Position of the electrical plug-in connection for position con-
troller and position sensor
→ Attach body casing and screw in clockwise all the way.
Start-up
Plug-in
connection must
be within the
marked area.
4
START-UP
WARNING!
Risk of injury due to incorrect operation.
▶ Prior to start-up, make sure operating personnel are familiar
with the operating instructions and have understood them.
▶ The device or system should be started up by fully trained
personnel only.
Risk of injury due to unintentional switching on of the plant
and uncontrolled start-up.
▶ Secure system against unintentional activation.
▶ Following assembly, ensure a controlled restart.
→ Connect compressed air to the positioner.
→ Connect positioner pneumatically to the position sensor.
→ Switch on the operating voltage of Type 8635.
→ Run the X.TUNE function.
english
9