Miller XT30 Benutzerhandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schweißen System Miller XT30 herunter. Miller XT30 44 Seiten. Air plasma cutting and gouging
Auch für Miller XT30: Benutzerhandbuch (40 seiten)

Seite drucken

5-9.

Connecting 120 Volt Input Power

Input6 2011 03 Ref. 253558-A

OM-253555 Page 20

�

Complete Parts List is available at www.MillerWelds.com

Installation must meet all National

and Local Codes—have only quali-

fied persons make this installation.

See rating label on unit and check input volt-

age available at site.

�

The Auto-Line circuitry in this unit auto-

matically links the power source to the

primary voltage being applied, either

120 or 240 VAC.

For 120 volts AC input power, a 15 or 20 am-

pere individual branch circuit protected by

time-delay fuses or circuit breaker is

required.

1 Multi-Voltage Plug And Power Cord Con-

nector (NEMA Type 5-15P Plug Shown)

For multi-voltage plug connections, see Sec-

tion 5-8.

2 Receptacle - NEMA Type 5-15R (Cus-

tomer Supplied)

OM-253555 Page 1