Miller Classic Series Gebrauchsanweisung - Seite 11
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zubehör für das Schweißen Miller Classic Series herunter. Miller Classic Series 20 Seiten. Welding helmet
Auch für Miller Classic Series: Benutzerhandbuch (32 seiten)
Seite drucken
SECTION 5 − REPLACING THE LENS COVERS
5-1. Replacing Outside Lens Cover
1
1
2
!
1
2
3
Remove lens cover frame by grasp-
ing the outside corners and pulling
the frame away from the helmet.
Remove lens cover and gasket from
the six-prong lens frame. Replace
lens cover and reinstall gasket and
lens in frame. Reinstall frame in hel-
met.
.
.
3
Be sure flat side of gasket
faces lens frame.
Never use the auto-darkening
lens without the inside and
outside lens covers properly
installed. Welding spatter will
damage the auto-darkening
lens and void the warranty.
Outside Lens Cover Frame
Lens Cover
Gasket
Be sure the flat side of lens gas-
ket faces the six-prong lens
frame.
Be sure all six prongs of lens
frame are securely fastened in
slots in helmet.
OM-252 052 Page 9
804 794