Miller Infinity Series Benutzerhandbuch - Seite 20
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Infinity Series herunter. Miller Infinity Series 32 Seiten. Auto-darkening helmets
Auch für Miller Infinity Series: Benutzerhandbuch (32 seiten)
Seite drucken
4-12.
Alarm Control
1
The Alarm emits an audible signal and
flashes the Grind mode light to alert the op-
erator at a specific time.
1 Info Control Button
The Alarm emits an audible
Alarm Procedure
signal and flashes the Grind
mode light to alert the operat-
� Press Auto On/Off (Mode) button to turn
or at a specific time.
helmet on.
1
Info Control Button
� Press Info button repeatedly until Alarm
Alarm Procedure
is displayed on screen.
Press Auto On/Off but-
� Use left/right buttons to select hour or
ton to turn helmet On.
minute for adjustment.
Press Info button re-
OM-269681 Page 18
2 Set Selection
3 Alarm On Indicator
peatedly until Alarm is
displayed on screen.
Press left/right arrows to
select hour or minutes
for adjustment
Use up/down arrows to
adjust to desired time.
�
2
Set Selection
3
Alarm On Indicator
3
� Use up/down buttons to adjust to de-
sired time.
Use left/right arrows to
select Set. Use up/down
� Use left/right buttons to select Set. Use
arrows to turn Alarm On/
up/down buttons to turn Alarm On/Off.
Off.
Press the OK button to
� Press the OK button to save, or press
save, or press the Auto
the Auto On/Off (Mode) button to exit
On/Off button to exit.
Press any lens button to turn off alarm.
Press any lens button to
turn off alarm.
2
OM-269681 Page 1