Miller Maxstar 161 S Benutzerhandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Maxstar 161 S herunter. Miller Maxstar 161 S 44 Seiten. Arc welding power source with auto-line
Seite drucken
4-4. Environmental Specifications
A. IP Rating
This equipment is designed for outdoor use. It may be stored, but is not intended to be used for welding outside during precipitation unless
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC 61000-3-12.
C. Temperature Specifications
Operating Temperature Range*
-40 to 104 °F (-40 to 40°C)
*Output is derated at temperatures above 104°F (40°C).
4-5. Duty Cycle And Overheating For Maxstar 161S Models
250
200
Stick 240 V
150
Stick 120 V
100
50
0
10
OM-275099 Page 12
.
A complete Parts List is available at www.MillerWelds.com
IP Rating
sheltered.
20
30
40
% Duty Cycle
IP23
Storage/Transportation Temperature Range
-40 to 158 °F (-40 to 70°C)
50
60
70 80 90 100
IP23 2014−06
ce-emc 4 2011-09
Temp_2016- 07
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, output stops, the
Overtemperature Light comes On,
Over Temp is displayed, and the
cooling fan runs. Wait fifteen min-
utes for unit to cool. Reduce amper-
age or duty cycle before starting to
weld again.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.