Miller Maxstar 161 STH Benutzerhandbuch - Seite 31

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Maxstar 161 STH herunter. Miller Maxstar 161 STH 44 Seiten. Arc welding power source with auto-line

Miller Maxstar 161 STH Benutzerhandbuch
SECTION 7 − ADVANCED MENU FUNCTIONS

7-1. Accessing Tech Menu For Maxstar 161 Models

1
ARC/TCY
STUC
FACTORY RESET
SOFTWARE NUMBER
.
A complete Parts List is available at www.MillerWelds.com
2
TECH
OFF
1
Press and hold Menu button for ap-
proximately four seconds to scroll
past User Menu to Tech Menu. Use
Menu button to cycle through para-
meters that can be set.
2
3
Rotate Encoder to adjust paramet-
er setting.
To exit Tech Menu, press and hold
menu button approximately one
3
second, or turn power off.
.
[ARC/TCY] Arc Timer: Monitors hours, minutes, and cycles of
valid arc on. To view, rotate encoder. To reset, rotate encoder until
[RESET] [YES] is displayed. Press Menu button to display [RESET]
[Done]. Displays turn to [000] [000].
[STUC] > [OFF] Stick Stuck: Detects if the electrode is stuck or
shorted to the workpiece. Turns weld output off to aid in freeing the
electrode. To turn on, rotate encoder. Not recommended for large
diameter electrodes.
[FACTORY RESET] Machine Reset: Resets all machine values
back to factory defaults. To reset, turn encoder to [RESET] [YES].
Then press Menu button. [RESET] [DONE] will be displayed when
the reset is complete and factory defaults have been restored.
[SOFTWARE NUMBER] Software Number: Software number and
revision will be displayed.
Menu Button
Parameter Display
Encoder
Settings in the Tech Menu are
global, meaning they may per-
tain to all or some of the pro-
cess.
OM-275099 Page 27