Miller PAPR Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für das Schweißen Miller PAPR herunter. Miller PAPR 40 Seiten. Auto-darkening helmets

NOISE can damage hearing.

Noise from some processes or equipment can damage hearing.

READ INSTRUCTIONS.

D Read and follow all labels and the Owner's Manual carefully before installing,

D Use only genuine replacement parts from the manufacturer.

D Perform maintenance and service according to the Owner's Manuals, industry standards,

and national, state, and local codes.

FUMES AND GASES can be hazardous.

Welding produces fumes and gases. Breathing these fumes and gases can be

hazardous to your health.

D Keep your head out of the fumes. Do not breathe the fumes.

D If inside, ventilate the area and/or use local forced ventilation at the arc to remove welding

fumes and gases.

D If ventilation is poor, wear an approved air-supplied respirator.

D Read and understand the Material Safety Data Sheets (MSDSs) and the manufacturer's

instructions for metals, consumables, coatings, cleaners, and degreasers.

D Work in a confined space only if it is well ventilated, or while wearing an air-supplied respirator.

Always have a trained watchperson nearby. Welding fumes and gases can displace air and

lower the oxygen level causing injury or death. Be sure the breathing air is safe.

D Do not weld in locations near degreasing, cleaning, or spraying operations. The heat and rays

of the arc can react with vapors to form highly toxic and irritating gases.

D Do not weld on coated metals, such as galvanized, lead, or cadmium plated steel, unless the

coating is removed from the weld area, the area is well ventilated, and while wearing an air-

supplied respirator. The coatings and any metals containing these elements can give off toxic

fumes if welded.

OM-235 936 Page 2

Wear approved ear protection if noise level is high.

operating, or servicing unit. Read the safety information at the beginning of

the manual and in each section.