Miller RUNNING GEAR Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller RUNNING GEAR herunter. Miller RUNNING GEAR 22 Seiten.
Seite drucken
POLE LENGTH
The 10 ton through the 14 ton running gears have poles that can be lengthened
(Fig. 1).
Telepole standard length
Telepole Lengthened
IMPORTANT: Use only the latch hole location and stop pin hole location
combination listed above for the latch to function properly.
To change the length of the pole, remove the latch and hardware from the inner
pole extension and relocate per chart. Remove the horizontal stop pin and
hardware from the outer pole and relocate according to corresponding latch hole
position. Replace the hardware.
ADJUSTMENTS
Latch Hole
Position
1
2
9
Stop Pin Hole
Position
B
A