Miller T94i Series Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller T94i Series herunter. Miller T94i Series 40 Seiten. Auto-darkening helmets
Auch für Miller T94i Series: Handbuch (32 seiten)

Seite drucken

5-6.

Lens Delay Control

1 Mode Button

2 Adjust Button

3 Increase (+) And Decrease (–) Buttons

Select Delay by pressing the Adjust button.

Use the + / - buttons to adjust the time for

the lens to switch to the clear state after

welding or cutting.

The delay is particularly useful in eliminating

bright after-rays present in higher amperage

applications where the molten puddle re-

mains bright momentarily after welding. Use

the + / - buttons to adjust delay from 0 to 10

(0.1 to 1.0 second).

The delay ranges for each mode are as

follows:

OM-255503 Page 16

(R)

MEMO ( B )

Weld, Cut, X-Modes - 0 - 10

Grind Mode - No delay adjustment

�

There is no lens delay adjustment in

the Grind mode.

Lens Delay Adjustment Procedure

� Press Mode (On/Off) button to turn lens

On. Helmet control display will appear.

� Press Mode button to select desired

function: Weld, Cut, or X-Mode.

� Use Adjust button to select delay, and

then adjust to desired delay using + / -

buttons.

� Begin welding or continue with other

lens adjustments.