Miller Watertank L Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller Watertank L herunter. Miller Watertank L 16 Seiten. Cooling system

Seite drucken
Miller Watertank L Benutzerhandbuch

4-3. Troubleshooting

Trouble
Coolant system does not work.
Decreased or no coolant flow.
SECTION 5 − ELECTRICAL DIAGRAMS
OM-180 231 Page 6
Be sure input power cord is plugged in to energized receptacle.
Check line fuses or circuit breaker, and replace or reset if necessary.
Motor overheated. Unit starts running when motor has cooled.
Have Factory Authorized Service Agent check Power switch and motor.
Add coolant.
Check for clogged hoses or coolant filter.
Disconnect pump, and check for sheared coupling. Replace coupling if necessary.
Figure 5-1. Circuit Diagram
Remedy
135 796-D