Miller Digital Performance Series Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für Motorräder Miller Digital Performance Series herunter. Miller Digital Performance Series 32 Seiten. Auto-darkening helmets
Auch für Miller Digital Performance Series: Handbuch (28 seiten), Benutzerhandbuch (32 seiten)
Seite drucken
3-5. Lens Delay Control
1
Lens Delay Adjustment
Buttons
2
Mode Control Button
Use the Lens Delay Short
and Long buttons to adjust
the time for the lens to switch
to the clear state after weld-
ing or cutting.
The delay is particularly use-
ful in eliminating bright af-
ter-rays present in higher
amperage
applications
where the molten puddle re-
mains bright momentarily af-
ter welding. Use the Lens
Delay Control buttons to ad-
just delay from 0 to 10 (0.1 to
1.0 second).
OM-256 476 Page 10
Digital Elite Lens Shown
1
The delay ranges for each
mode are as follows:
Weld, Cut, And X-Modes −
0 − 10
Grind Mode − No delay ad-
justment
.
There is no lens delay
adjustment in the Grind
mode, and in the Cut
mode (when sensitivity
is set to 10).
.
Cut mode is not present
on Pro-Hobby helmets.
X-Mode is not present
on Pro-Hobby and Per-
formance helmets.
2
Lens Delay Adjustment
Procedure
S
Press Auto On/Off but-
ton to turn helmet On.
Helmet lens will darken
twice and then clear.
S
Press Mode button to se-
lect desired function:
Weld, Cut, or X-Mode.
S
Use Short and Long ad-
justment buttons to se-
lect desired delay.
S
Begin welding or contin-
ue with other lens adjust-
ments.