Miller Elite Series Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für Motorräder Miller Elite Series herunter. Miller Elite Series 32 Seiten. With external grind button auto-darkening helmets
Auch für Miller Elite Series: Gebrauchsanweisung (32 seiten), Handbuch (20 seiten), Benutzerhandbuch (32 seiten)

Seite drucken

� Before welding, adjust the auto-darkening lens sensitivity setting to meet the application.

� Stop welding immediately if the auto-darkening lens does not darken when the arc is struck.

NOISE can damage hearing.

Noise from some processes or equipment can damage hearing.

� Wear approved ear protection if noise level is high.

WELDING HELMETS do not provide unlimited eye, ear,

and face protection.

Arc rays from the welding process produce intense visible and invisible (ultra-

violet and infrared) rays that can burn eyes and skin. Sparks fly off from the

weld.

� Use helmet for welding/cutting applications only. Do not use helmet for laser welding/cutting.

� Use impact resistant safety spectacles or goggles and ear protection at all times when using

this welding helmet.

� Do not use this helmet while working with or around explosives or corrosive liquids.

� This helmet is not rated for overhead welding. Do not weld in the direct overhead position

while using this helmet unless additional precautions are taken to protect yourself from arc

rays, spatter, and other hazards.

� Inspect the auto-lens frequently. Immediately replace any scratched, cracked, or pitted cover

lenses or auto-lenses.

� Lens and retention components must be installed as instructed in this manual to ensure com-

pliance with ANSI Z87.1 protection standards.

� This helmet provides protection from projectiles associated with grinding, chipping, and re-

lated activities; it is not a hard hat and does not provide protection from falling objects.

READ INSTRUCTIONS.

� Read and follow all labels and the Owner's Manual carefully before installing,

operating, or servicing unit. Read the safety information at the beginning of the

manual and in each section.

� Use only genuine replacement parts from the manufacturer.

� Perform installation, maintenance, and service according to the Owner's Manuals, industry

standards, and national, state, and local codes.

FUMES AND GASES can be hazardous.

Welding produces fumes and gases. Breathing these fumes and gases can be

hazardous to your health.

� Keep your head out of the fumes. Do not breathe the fumes.

� Ventilate the work area and/or use local forced ventilation at the arc to remove welding fumes

and gases. The recommended way to determine adequate ventilation is to sample for the

composition and quantity of fumes and gases to which personnel are exposed.

� If ventilation is poor, wear an approved air-supplied respirator.

� Read and understand the Safety Data Sheets (SDSs) and the manufacturer's instructions for

adhesives, coatings, cleaners, consumables, coolants, degreasers, fluxes, and metals.

� Work in a confined space only if it is well ventilated, or while wearing an air-supplied respirator.

Always have a trained watchperson nearby. Welding fumes and gases can displace air and

lower the oxygen level causing injury or death. Be sure the breathing air is safe.

OM-256476 Page 2