AquaOne CPF 50000 Gebrauchsanweisung - Seite 15
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Water Filtration Systems AquaOne CPF 50000 herunter. AquaOne CPF 50000 19 Seiten. Pond pressure filter
Seite drucken2. Dig a hole beside the pond, bedded filters below Clamp. Or put the
filter in a strong smooth place.
3. In order to facilitate work on filter, installed to ensure that the lid can
open.
4. Pumping height (the vertical height of the outlet to the pond water),
more than 1m to choose a correspondingly more powerful pump.
Connecting hoses
We recommend warming the hose with hot water, pushing it onto the spiral
stepped hose adapter and securing it with a hose clip. This makes the
con-nection more watertight.
1. Try to choose larger diameter hose to connect the filter.
2. For hoses that are longer than 4 m, please always use hoses that
correspond to the upper value of the scale.
3. In order to avoid pressure loss, cut the spiral stepped hose adapter at
the relevant points for each hose.
Cleaning connection
Connected to the cleaning connection. This allows you to drain the dirty water
directly into the sewerage system or onto a flower bed.
Starting on the pressure filter
Before each start-up, you should check that the connected hoses, the sealing
cap and the clamp with safety latch are sitting correctly.
the function switch must be set to the "filter" symbol. lt is imperative that you
read and follow the safety guidelines before start-up.
1. Switch on the pump.Caution! The UV lamp must not be operated
without water flowing it.
2. Check all the sealing connection, lt there is leaking,it should be
adjusted.
3. Pass filter on the power supply.
4. The filter system with integrated UV must be running permanently, 24
hours a day.
5. The UV lamp must be replaced after 8,000 hours of operation in order
to ensure that the filter UV continues to operate with optimum
effectiveness.
6. The filter system must be cleaned regularly.
Attention:in the case of a new installation, the pressure filter only reaches its
full biological cleaning effectiveness after a few weeks. Extensive bacterial
activity only starts at temperature of + 10°C or above.
By Aquaristikwelt24
www.aquaristikwelt24.de
15 |
S e i t e