Diamond 350/GXS Betriebs- und Wartungshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungshandbuch für Kommerzielle Lebensmittelausrüstung Diamond 350/GXS herunter. Diamond 350/GXS 16 Seiten. Professional slicer ce
Seite drucken
Do not pull the slicer or the feeding
cable (Fig. n°29) to unplug it.
Regularly check the state of the fee-
ding cable; a worn out cable or in any
case not intact represents a serious
electrical danger.
If the machine remains unused for
long periods of time, before using it
again have it checked by a "Service
Center".
If the slicer should show signs of
malfunctioning it is advisable to turn it
off and to not use it, to not directly in-
tervene for repairs, and to contact the
"Service Center", shown on the back of this manual.
Do not leave the slicer uselessly plugged in. Unplug the machine when it is not
being used.
Even if safety devices are installed on dangerous points of the machine, avoid
placing hands near the blade and other moving parts.
Never cut the product, by now finished, without the aid of the goods
pressing arm.
Do not assume positions that bring body parts in direct contact with the
blade.
CHAP. 4 - GETTING TO KNOW THE SLICER
4.1 - CONSTRUCTION FEATURES
The slicer is made of an anodized alluminum alloy (Peraluman AlMg5). It
guarantees contact with food-stuffs (hygienic) and is resistant to acids and salts
apart being highly resistant to oxidation.
The blade is in 100 Cr6 rectified, chromium-plated and hardened steel assuring a
precise and net cut of the product even after being sharpened. The majority of
the other components present are in:
ABS:
-
Shockproof plastic (handguard);
-
AISI 430 or 304 steel.
-
Fig. n°29
14
LEGEND:
1
Sharpener handgrip
11
2
Sharpener
12
3
Thickness gauge plane
13
4
Handguard
14
5
Push-button panel
15
6
Foot
16
7
Graduated handgrip
17
8
Stem
18
9
Stem knob
19
10
Goods holder plate
20
1
2
15
3
4
5
6
10
7
9
8
Blade protection
Base
Extractable pin
Bladeguard
Goods presser
Goods presser handgrip
Bladeguard tie rod knob
Sliceguard
Thickness gauge plane sharpener handgrip
Thickness gauge plane sharpener
14
13
12
16
11
17
19
20
18
Fig. n°30
15