burkle 5600-1252 Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Water Pump burkle 5600-1252 herunter. burkle 5600-1252 12 Seiten. Pp barrel pump - discharge hose/stopcock

Seite drucken
English
General safety requirements
`
`
Read these directions for use carefully before using.
`
`
Keep these directions for use where they will be
accessible for all users.
`
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
`
The instrument must only be used by qualified
skilled employees.
`
`
The instrument is designed for use in industry, labo-
ratories and science. The instrument is not suitable
for any application in private or public spaces.
Safety instructions before using
`
`
Follow the manufacturer's instructions and safety
instructions of the medium you are filling.
`
`
Damage to the respiratory tract and other organs
due to escaping or off-gassing media. Fill only in
ventilated rooms or under a suitable exhaust hood.
Wear appropriate protective clothing.
The instrument is not suitable for filling off combus-
`
`
tible liquids.
`
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
`
`
Do not use any force when operating the instru-
ment.
Safety instructions during and after use
CAUTION!
Escaping liquids due to falling over or tipping of
the instrument. Bodily injury due to escaping liquid
and damage to the instrument.
`
`
Ensure sufficient stability of the instrument.
`
`
Shut down and secure the instrument immedi-
ately.
`
`
Contact the dealer or manufacturer.
`
`
The instrument is suitable for indoor use and ma-
nual operation.
`
`
Pump with manual operation. Not suitable for
continuous operation.
`
`
Pay attention to have sufficient space above during
the filling process (minimum height: height of the
maximum extended piston + 20 cm).
`
`
The instrument is not suitable for cleaning in a
dishwasher.
NOTE!
Pump and valves can be damaged or plugged by
dirt particles.
`
`
Do not fill off any polluted media.
`
`
Rinse the pump with a pH-neutral medium.
Layout and function
`
`
The instrument is made of non-conductive material
(PP, PVC) and is suitable for filling acids and alkalis
(pay attention to the chemical resistance).
`
`
The instrument is suitable for filling from cont-
ainers with a capacity of 60 - 1000 l into smaller
containers.
`
`
The instrument can be used with a discharge tube
with maximal length of 1,20 m.
`
`
The instrument is maintenance-free and suitable at
a temperature range from 0 to 40 °C.
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Assembly
WARNING!
Some liquid will continue to run while the dischar-
ge hose is being screwed on. Bodily injury due to
escaping liquid.
`
`
Close the shut-off valve  on the discharge
hose before mounting.
1. Screw the discharge hose  onto the riser pipe .
2. Guide the barrel screw connection (accessory; not
included in delivery) and riser pipe  with the
discharge hose  into the container and screw it
together finger-tight.
3. If necessary adjust the riser pipe.
NOTE!
Ensure to use a fitting thread (see accessories).
`
`
Screw the thread by hand and without any
force.
Safe filling
1. Hold the discharge hose in the filling container.
2. Open the shut-off valve  on the discharge hose.
3. Activate the piston rod  by using the handle 
and fill off the liquid.