AQUAPHOR OSMO PRO 100 EU Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Water Filtration Systems AQUAPHOR OSMO PRO 100 EU herunter. AQUAPHOR OSMO PRO 100 EU 16 Seiten.

Seite drucken

Safety

Installation:

It is not recommended to do the work

on connecting OSMO Pro to the wa-

ter supply network yourself. To con-

nect OSMO Pro, it is recommended

to contact the service department

of Aquaphor or regional dealers of

Aquaphor. The manufacturer is not

responsible for the improper quali-

ty of work on connecting with the

OSMO Pro to the water supply net-

work, as well as for the result of this

work. The responsibility for the short-

comings of this work, as well as for

causing harm to the health or property

of the consumer or other persons as

a result of these shortcomings, by the

party performing the installation.

It is forbidden to replace the con-

nection unit included in the kit with

a connection unit of another model.

During operation:

OSMO Pro is designed for post-treat-

ment and softening of cold drinking

water from centralized water supply

systems. When installing OSMO Pro

outside of central drinking water sup-

ply systems, it is to do source water

analysis for compliance with sanitary

standards. If the source water does not

meet sanitary standards, the service

life of the prefiltration unit and mem-

brane unit is sharply reduced.

If the source water differs significant-

ly from the requirements of sanitary

standards, it is recommended to install

additional water treatment systems

(iron remover, softener, dechlorina-

tor, disinfection systems, mechanical

cleaning, etc.). After installing OSMO

Pro, you need to check the purified

water. In the future, to ensure that the

OSMO Pro is working properly, the

treated water should be checked ap-

proximately once a year. If the results

of the analysis are unsatisfactory, the

water should not be drunk, you should

contact the service centre.

Although OSMO Pro is capable of trap-

ping bacteria that may be contained

in the source water, it is recommend-

ed to use the water purifier only with

microbiologically safe water. Do not

use the system with water of unknown

quality that has not undergone addi-

tional disinfection.

Use OSMO Pro only for water purifica-

tion from a cold water supply system.

If the ambient temperature during op-

eration of OSMO Pro reaches +38 °C,

OSMO Pro must be disconnected from

the cold water main until the temper-

ature drops.

Purified water is not subject to long-

term storage. We recommend using

fresh filtered water.

If you have not used the water purifier

for more than 8 hours, drain the first

250 ml of water.

If it is known that OSMO Pro will not

be used for a day or more (for exam-

ple, when leaving the country), it must

be disconnected from the cold water

main (the connection point is closed).

If you have not used OSMO Pro for

more than two weeks, fill and drain

the water storage tank and let it refill.

Protect OSMO Pro from freezing, di-

rect sunlight, contact with hot objects,

including hot water pipes and heating

systems.

Protect OSMO Pro from bumps and

drops.