AQUAPHOR RO-102S IL Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Water Filtration Systems AQUAPHOR RO-102S IL herunter. AQUAPHOR RO-102S IL 16 Seiten. Reverse osmosis system

Seite drucken

WARNING

Please read this manual carefully before you proceed with the installation. Your failure to follow any

of the attached instructions or operating parameters may lead to the product's failure and possible

property damage.

Save the manual for future reference.

Thank you for your purchase of this Aquaphor RO. With proper installation and maintenance, this

system will provide you with premium quality drinking water. The technology used in the Aquaphor

RO enriches the filtered water with minerals in controlled quantities.

This water is highly beneficial for the body as it helps to normalize the physiological processes.

If you have any questions or concerns, please contact our customer service department at

email [email protected]. We are always happy to answer any questions you may have regar-

ding our product.

Introduction

Aquaphor RO operates by removing contaminants from water at the molecular level. By using your

household water pressure to squeeze the water against a special membrane, the water molecules

are separated from any impurities that exist.

Rejected dissolved solids are automatically rinsed away through the drain leaving you with only

high-quality, delicious water for your use.

1. Operational parameters

Operating temperatures:

Operating pressure:

Dimensions (length х height х width):

Maximum flow rate membrane cartridge

(water temperature +25 °С (77 °F)

with a constant pressure of 0.4 MPa

(4 bar / 58.02 psi)

Cleaned water to drained water ratio (wa-

ter temp. no less than +20 °С / 68 °F)

Mass no more than

pH parameters:

Iron:

TDS (Total Dissolved Solids):

Turbidity:

Hardness:

Maximum 38 ºC (100.4 ºF)

Maximum 0.63 MPa

(6.3 bar / 91.4 psi)

The operating pressure in your home should be tested over a

24 hour period to attain the maximum pressure. If it is above 0.63

MPa (6.3 bar / 91.4 psi), then a pressure regulator is necessary,

and will be required.

371 х 420 х 190 mm

For Aquaphor RO-101S, Aquaphor RO-101S EU,

Aquaphor RO-101S IL – 50 GPD

For Aquaphor RO-102S, Aquaphor RO-102S EU, Aquaphor RO-

102S IL – 100 GPD

1:4-1:6

6.2 kg / 13.66 lbs

Maximum 10

Maximum 0.3 ppm

Maximum 2000 ppm

Maximum 1 NTU

Recommended water hardness should not exceed 350 ppm as

CaCO

(20.5 grains per gallon). The system will operate with hard-

ness over 350 ppm (20.5 gpg), but the membrane cartridge life

may be shortened. The addition of a water softener may lengthen

the membrane cartridge life.

Minimum 5 ºC (41 ºF)

Minimum 0.19 MPa

(1.9 bar / 27.6 psi)

Minimum 4