BURL B2 Bomber ADC Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikanlagen BURL B2 Bomber ADC herunter. BURL B2 Bomber ADC 17 Seiten. B2 bomber adc b2 bomber dac with dante

Seite drucken
BURL B2 Bomber ADC Benutzerhandbuch
B2 ADC REAR UNIT CONNECTIONS:
Figure 5
1. DANTE Ethernet Output. For units with a Dante "Brooklyn II" card installed.
(See page 8 for Dante config.)
2. AES 1- Digital Output for Ch. L & R (with dual wire "off"), Ch. 1 (with dual wire "on" for 192kHz and 176kHz).
3. AES 2- Digital Output for Ch. L & R (with dual wire "off"), Ch. 2 (with dual wire "on" for 192kHz and 176kHzt).
4. TOSLINK- Digital Output for Ch. L & R.
5. S/PDIF- Digital output for Ch. L & R.
6. Word Clock Output- Sends word clock out to other units.
7. Word Clock Input- Clock input for an external clock.
8. Analog Input Trim- For fine tuning input levels.
9. Analog Input- Standard XLR input.
B2 DAC REAR UNIT CONNECTIONS:
Figure 6
1. DANTE Ethernet Input - For units with a Dante "Brooklyn II" card installed.
(See page 8 for Dante config.)
2. AES 1 - Digital Input for Ch. L & R (No Dual Wire support)
3. AES 2 - Digital Input for Ch. L & R (No Dual Wire support)
4. TOSLINK - Digital Optical S/PDIF Input for Ch. L & R.
5. S/PDIF - Digital S/PDIF Input for Ch. L & R.
6. Word Clock Output - Sends word clock out to other units.
7. Word Clock Input - Clock input for an external clock.
8. Analog Output Trim - For fine tuning output levels.
9. Analog Output - Standard XLR output.
1
3
2
1
2
3
5
5
7
4
6
5
6
7
4
8
9
8
9