Aquaport AQP-FKM1 Installations- und Betriebsanleitung - Seite 14
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Water Filtration Systems Aquaport AQP-FKM1 herunter. Aquaport AQP-FKM1 17 Seiten.
Seite drucken
TROUBLE SHOOTING
BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.
Problem
Water contains tiny
black particles.
Water appears 'milky', or has
air bubbles and is cloudy.
Chlorine taste and/or odour
in the product water.
Dispenses water very slowly.
Water leaking at fittings.
No water dispensing
from system.
12 INSTALLATION AND OPERATING INSTRUCTIONS
Possible Causes
New filter contains activated carbon,
which is food grade safe.
Air in the system.
The filter canister is no longer removing
chlorine from the water supply.
The filter has been installed for too long.
The filter canister has become clogged.
Tubing may not be installed properly.
Shut off valve or mains water supply may
be turned off.
Filter canisters not fully installed.
CUSTOMER HOTLINE 1300 764 325
What To Do
Turn on the water faucet and allow these harmless
carbon particles to purge from the canister. Turn off
water faucet when water is clear.
Flush water through system until water appears clear, or
use the system and this condition will clear itself.
Replace the filters.
A 12 month change-out period is recommended.
Replace filters.
High sediment levels can cause premature clogging.
Replace filter.
Refer to page 8, Section D, Tubing Installation,
and re-install fittings. The use of a tube cutter is
recommended.
Open shut off valve switch or open mains water supply
water.
Ensure the filter canister is fully inserted to filter head
with full 1/4" turn in clockwise direction.