Burley SOLO Betriebsanleitung und Sicherheitshandbuch für den Besitzer - Seite 9

Figure 8

Figure 9

Cub

Figure 10

Figure 11

Encore, Honey Bee and Bee

Installing the Tow Bar (Cub, Encore, Honey Bee and Bee)

Cub: Slide tow bar into receiver on left side of trailer while holding pin up (Figure 8).

Insert pin through hole in tow bar. Clip top of bent pin into tow bar mount to lock. Insert other

lock pin from the bottom of the tow bar (Figure 9). Close retainer to secure lock pin.

Encore, Honey Bee and Bee: Slide tow bar into receiver on left side of trailer while pressing

down on the button (Figure 10). Insert lock pin through the rear tow bar receiver and the hole

at the end of the tow bar (Figure 11). Close retainer to secure lock pin.