Burley Tools R1630 Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Elektrowerkzeug Burley Tools R1630 herunter. Burley Tools R1630 9 Seiten.

Operation

WARNING!

Danger of death!Water pipes can sometimes be difﬁcult to tell apart from gas

pipes.Under no circumstances

WARNING!

Health risk due to rising vapours! Wear an appropriate respirator mask and

make sure the workplace is adequately ventilated.

NOTICE!

Risk of damage!An excessive supply of heat can cause damage to the

workpiece.Perform a sample operation in a safe place.

Removing paint and paint residues

- Heat up paint or residual paint on the surface to be treated using the hot air gun and

remove using a suitable tool.

Dissolving adhesives

- Many adhesives can be softened using heat. Joints can be separated or excess glue

can be removed in this way.

Soft soldering

- The product is suitable for spot soldering or soldering pipes. The fusing temperature of

the solder must be below 400 °C.

Bonding and deforming synthetic materials

- Heat up synthetic materials by consistent see-saw movements. Use suitable hot

adhesives for bonding.

Drying

- The product can be used for drying coats of paints, binders and sealants.

Shrinking

- Select the shrink hose according to the workpiece and heat up evenly using the hot air gun.

Thawing of water pipes

- Always heat up the frozen section from edge to middle. Exercise extreme caution when

heating up plastic pipes and joints between pipe sections in order to prevent damage.