Burlington RIV2 GOLD Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Sanitärprodukt Burlington RIV2 GOLD herunter. Burlington RIV2 GOLD 4 Seiten.

IMPORTANT:

For valve body installation,please refer to instructions included with HOX.006V.

For RIV2 trim sets, please follow below steps to install:

1. Remove part A and part B from the valve. Part A & B, with the two plastic rings included

in the valves are NOT need for this installation.

Attention: Please do NOT rotate the cartridge when removing part A.

2. Parts should be assembled in sequence illustrated by Figure 2.

1) Screw the retaining sleeve onto the valve body.

2) Slide the back plate onto the retaining sleeve, slightly press the back plate evenly so

that the double-sided tape on the back attach to the wall.

3) Install the handle fixing and temperature handle fixing. For the TEMPERATURE

HANDLE FIXING, ensure the position D is aligned with position C as indicated in the

diagram.Then fix the 2 handle fixings by the screws supplied.

3. Assemble the 2 handles (lever handle on the top and cross handle on the bottom).

Riviera 1000 shower plate and handles Chrome

Riviera 1000 shower plate and handles Gold

Riviera 1500 shower plate and handles Chrome

Riviera 1500 shower plate and handles Gold

We do NOT recommend you use any household cleaners to clean the product because

these cleaners change substance or formula too frequently. The product should be

always cleaned only with soapy water and rinsed with clean water and dried with a soft

colth.

RIV2 CHR

RIV2 GOLD

RIV3 CHR

RIV3 GOLD