Burlington T51 CHR Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Sanitärprodukt Burlington T51 CHR herunter. Burlington T51 CHR 2 Seiten. Basin stand

Check that the horizontal bracket bar is vertical using a spirit

level.

Using a

" drill bit drill the six holes on the marked positions.

Note:

washers supplied. These can

determine the installation position because the stand may

Fix each of the two brackets onto the wall using the 4 screws

Place the 4 rubber washers into the 4 recesses as shown.

The 4 rubber washers are not

recommended to use when installing

the marble basin onto the stand.

For ceramic basin, place the basin in position ensuring that it

The top part of the rail

can be adjusted slightly

if the basin is not level.

UK:

Bathroom Brands, Lake View House, Rennie Drive, Dartford, Kent, DA1 5FU

Tel: 01322 473222

Web: www.bathroombrands.com

For marble basin, please refer to the installation instructions

that came with the basin.

Issue date: 20191223